E-Bike & Carbon Frame Protection

Technology

A front facing image of Frameguard, set curved - displaying its flexibility

Metal Plate

An aluminium plate moulded inside the Frameguard reinforces the tough, shock absorbing polymer material, and also bends the Frameguard to suite each bike frame.

Impact Absorbing

The high shock absorbing polymer is specially formulated to take on heavy rock strikes, and avoid shattering the factory fitted motor casing.

Arched Design

The overall curvature of Frameguard gives extra volume, to ensure a seamless fit between the guard and the frame - regardless of bike brand.

A reverse image of Frameguard, showing the 3M backed, metal tab attachments

Mounting Mechanism

This is in 2 parts. There are 4 flexible metal and adhesive tabs that form and stick to your frame and motor casing, these provide the anchor for your Frameguard without modifying or damaging your bike in any way.
‍
Velcro straps pass through each of these tabs and also through tracks in the Frameguard, pulling it neatly and securely against your frame.

This means that undoing the Velcro straps easily releases the Frameguard for bike cleaning, leaving the tabs and straps in place. To put it back on simply thread the straps back through the Frameguard and tighten them up.

Watch Fitting Video

Contoured Section

Tapers towards your bike frame to give it a seamless finish, and appear as part of the bike.

Drain Holes

To avoid the build-up of mud and debris under the Frameguard, these drain holes will allow water to flow through when washing the bike down post-ride.

Inner Channel

Allows water, mud, and debris to flow through.

Specs

Models

Frameguard E

Frameguard C

Frameguard AL

Built For

Frameguard E

For use with E-Bikes

Frameguard C

For use with Carbon & Wide Steel Frames

Frameguard AL

For use with aluminium frames

Size

Frameguard E

490mm l x 75mm h

Frameguard C

390mm l x 58mm h

Frameguard AL

390mm l x 45mm w

Colour

Frameguard E

Black

Frameguard C

Black

Frameguard AL

Black

Weight

Frameguard E

200g

Frameguard C

120g

Frameguard AL

90g

Material

Frameguard E

Flexible viscoelastic polymer with a aluminium metal plate insert.

Frameguard C

Flexible viscoelastic polymer with a aluminium metal plate insert.

Frameguard AL

Flexible viscoelastic polymer with a aluminium metal plate insert.

Design

Frameguard E

Polymer absorbs heavy impacts and the metal plate shapes to your frame while adding an extra layer of protection.

Frameguard C

Polymer absorbs heavy impacts and the metal plate shapes to your frame while adding an extra layer of protection.

Frameguard AL

Polymer absorbs heavy impacts and the metal plate shapes to your frame while adding an extra layer of protection.

Fitting

Frameguard E

Extra strength 3M VHB tape is attached to metal tabs which detach from Frameguard – the tape can be easily removed without causing damage to the frame. In some cases a tab may be obstructed by a join or weld on the frame so we include an extra length of Velcro to replace this tab and give you more flexibility of fit.

Frameguard C

Extra strength 3M VHB tape is attached to metal tabs which detach from Frameguard – the tape can be easily removed without causing damage to the frame. In some cases a tab may be obstructed by a join or weld on the frame so we include an extra length of Velcro to replace this tab and give you more flexibility of fit.

Frameguard AL

Extra strength 3M VHB tape is attached to metal tabs which detach from Frameguard – the tape can be easily removed without causing damage to the frame. In some cases a tab may be obstructed by a join or weld on the frame so we include an extra length of Velcro to replace this tab and give you more flexibility of fit.

Frameguard E

Frameguard C

Frameguard AL

Models

Frameguard E

Frameguard C

Frameguard AL

Built For

For use with E-Bikes

For use with Carbon & Wide Steel Frames

For use with aluminium frames

Size

490mm l x 75mm w

390mm l x 58mm w

390mm l x 45mm w

Colour

Black

Weight

200g

120g

90g

Material

Flexible viscoelastic polymer with a aluminium metal plate insert.

Design

Polymer absorbs heavy impacts and the metal plate shapes to your frame while adding an extra layer of protection.

Fitting

Extra strength 3M VHB tape is attached to metal tabs which detach from Frameguard – the tape can be easily removed without causing damage to the frame. In some cases a tab may be obstructed by a join or weld on the frame so we include an extra length of Velcro to replace this tab and give you more flexibility of fit.